Start a conversation

Hippotizer downloads

Current Software Downloads


Current 4.6 Version: 

Hippotizer version 4.6.2
Release notes and updated manual files are in the download folder 

Hippotizer Version 4.6.2 adds new features and functionality to V4 and V4+ systems.

Software Assurance This version will install on all V4 and V4+ systems even if they report having expired Software Assurance, however when expired the output will be watermarked. Software Assurance has changed as of 4.6.0 to include a minimum number of releases. Please see the Software Assurance section of this manual for more information for more info.
  • Systems currently running 4.4.X or 4.5.X should export all programming, carry out a clean install and then import data into 4.6. Some Changes in 4.6 may require updates to programming. See the Release Notes for more information.
  • Systems currently running 4.3.3 or older software must clean install 4.6.2; all existing programming and settings will be lost.

!Always back up your show before changing software version.

New Features in 4.6.2

Floating Keyframes This new keyframe type can be used to transition any float pins from there current value to the value after the floating keyframe, using a linear fade over time. These keyframes offer flexibility switching between timelines and allow smooth transitions with less snap value changes.

Shift Time This feature allows for keyframes before and after the playhead to be shifted forward or backwards in a specified amount of time.

CITP Streaming mixes/layers and thumbnail sharing using CITP is now fully operational.

Timeline has been further optimised improving overall performance and stability.

Functionality Changes In 4.6.2

  • Added the option to unicast sACN from the PixelMapper component.
  • Added sACN output in the MultiController.
  • Improved FlexRes Encoder supported source files codecs.
  • Added crop and pre-multiply alpha functions to the FlexRes command line encoder.

For a full list of changes and fixes please see the release notes.



Hippotizer version 4.6.1
Release notes and updated manual files are in the download folder 

Hippotizer is continuously being developed and improved; please read these notes carefully to
understand the changes and limitations with each version.
Software Assurance Release Date: 2-Feb-2020.
Software Assurance is changing as of 4.6.0 to include the number of included feature releases. Please see
the Software Assurance Policy section of this manual for more information.
All V4 and V4+ systems with Software Assurance valid as of 02-Feb-2020 can install 4.6.0.
Software Assurance determines what version of Hippotizer will install and run on a system. Once
installed, software will continue to function indefinitely.

Release notes

Online manual

Hippotizer Version 4.6.1 adds new features and functionality to V4 and V4+ systems.

  • Systems currently running 4.4.X or 4.5.X should export all programming, carry out a clean install and then import data into 4.6. Some Changes in 4.6 may require updates to programming. See the Release Notes for more information.
  • Systems currently running 4.3.3 or older software must clean install 4.6.0; all existing programming and settings will be lost.
  • ! Always back up your show before changing software version !

New Features in 4.6.1

Reassignable Tracks As of 4.6.1, any track within Timeline Plus can be re-assigned to one (or more) track of the same type. So, if you have a show running on 4 mixes, you can start four mixes on a prep dongle and program offline with Hippotizer’s Visualizer. When it comes time to go to site, the four mixes can then be re-assigned to mixes on the actual machines. A track can be assigned to control multiple target tracks for back up and real-time visualization.

  • Seamlessly transition from pre-programming to playback by simply re-mapping the mix from visualizer to output.
  • Effortlessly control parallel back-ups by triggering two targets at once.
  • Control the Visualizer and the output in parallel for real-time Realtime Visualization and confidence monitoring.

Rename Tracks In Timeline+ Any Track in Timeline can be given a ‘friendly name’ for quick identification and ease of programming.

  • Organise complex shows for faster programming
  • Simplify user training and onboarding

Click here to see the full list of New features, Functionality changes, Fixes, and Known issues in 4.6.1 in the online manual.


Current 4.5 Version: 

Hippotizer version 4.5.5
Release notes and updated manual are in the download folder 

Release Date: 29-June-2019. Software Assurance Date: 28-Feb-2019

Release Notes


Important Installation Information: 

If you are running 4.5.1, 4.5.2, 4.5.3 or 4.5.4 will not require any reprogramming

If you are running 4.5.0 an upgrade to 4.5.5 will require reprogramming of Layer Geometry and Zoom. 

If you are running software older than 4.5.0 and upgrade to 4.5.4 it will require significant changes to programming especially in mixes masters. 

4.5.5 Improves on 4.5.4 in several areas: 

  • Fixed an issue where Hippotizer would not install with Prep Dongles 
  • Improved EDID controls in Hippolauncher for Nevis+
  • Improved overall performance of Tierra+, Taiga and Taiga+
  • Fixed issue with fan profile for Tierra+
  • Improved sACN performance through DMX component 
  • Fixed an issue in Pixelmapper where fixtures would jump when moved with the mouse. 
  • Upgraded NDI version to 4.5 improving stability and adding support for NDI-HX. 
  • Improved Hippolaunch on smaller resolution displays.

 For a full list of changes please see the release notes.

Continued in the manual here 

The Software Assurance date of this release has been back-dated: it will install on all V4 and V4+ systems.


Legacy Software Downloads

Hippotizer version 4.6.0 download
Release notes and updated manual files are in the download folder 

Hippotizer version 4.5.4 download
Release notes and updated manual are in the download folder

Hippotizer version 4.5.3 download
Release notes and updated manual are in the download folder

Hippotizer version 4.5.2 download
Release notes and updated manual are in the download folder

Hippotizer version 4.5.1 download
Release notes and updated manual are in the download folder

Hippotizer version 4.5.0 download
Release notes and updated manual are in the download folder

Hippotizer version 4.4.5 download
Release notes and updated manual are in the download folder

Hippotizer version 4.4.4 download 
Release notes and updated manual are in the download folder


Hippotizer version 4.4.3 download 
Release notes and updated manual are in the download folder 


Hippotizer version 4.4.2 download
Release notes and updated manual are in the download folder 


Hippotizer version 4.4.1 download
Release notes and updated manual are in the download folder 


Hippotizer version 4.4.0 download
Release notes and updated manual are in the download folder 


Hippotizer version 4.3.3 download
Release notes and updated manual are in the download folder 


Hippotizer 4.3.2 download
Release notes and updated manual are in the download folder 


Hippotizer 4.3.1 download
Release notes and updated manual are in the download folder


Hippotizer 4.3.0 downloads
Release notes and updated manual are in the download folder


Hippotizer 4.2.2 download
Release notes and updated manual are in the download folder


Hippotizer 4.2.1 download



Hippotizer 4.1 download



The SHAPE installer is bundled in the Hippotizer installer. This is by design so you have the correct version of SHAPE for the version of Hippotizer



 Hippotizer v3 (3.2.4) and archived installers

Choose files or drag and drop files
Was this article helpful?
Yes
No
  1. Ned Steele

  2. Posted
  3. Updated

Comments